[NiosLDKBash] ...uClinux/: nr -t

nios-run: Terminal mode (Control-C exits)
-----------------------------------------

***GDB stub is not loaded: Continuing with kernel startup.

uClinux/NIOS
Altera NIOS Excalibur support (C) 2001 Microtronix Datacom Ltd.
Calibrating delay loop.. ok - 9.34 BogoMIPS
Memory available: 14332k/15923k RAM, 0k/0k ROM (0k kernel data, 456k code)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
Linux version 2.0.38.1pre7 (administrator@REBOOT) (gcc version 2.9-nios-010625)
#1 Thu Sep 13 14:04:30 2001
reg_chardev 0
reg_chardev 0
NIOS serial driver version 0.0
reg_chardev 0
reg_chardev 0
ttyS0 (irq = 17) is a builtin NIOS UART
reg_chardev 0
reg_chardev 0
reg_chardev 0
reg_chardev 0
Ramdisk driver initialized : 16 ramdisks of 4096K size
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: A00000-14DAFFF (RO)
cs89x0.c:v1.02 Microtronix 01-Apr-2001
eth0: cs8900 rev J found at 0x00004000 3.3Volts
      media RJ-45,
      Station: 00 60 80 61 00 28
Open of blkmem arena 0 at a00000, length adb000
VFS: Mounted root (romfs filesystem) readonly.
expand: from=/ramfs.img to=/dev/ram0
eth0: Setting MAC address to  00 60 80 61 00 28.
eth0: Attempting TP
eth0: using 10Base-T (RJ-45)
/etc/issue              www.microtronix.com                27 July 2001
                                                  Modified 08 OCT. 2001
                 Welcome to uClinux on the Excalibur!
***********************************************************************
* In order to log into uClinux, at the logon prompt and user name can *
* be used...  However, the password that must be entered is           *
* "uClinux"...!!!                                                     *
***********************************************************************
                      Have a nice uClinuxing...?!

Excalibur login: