Quartus

WYSIWYG primitive <name> cannot have clk port when regout port is not used


CAUSE: The specified WYSIWYG primitive have a clk port, but is not using a regout port. The WYSIWYG primitive cannot have a clk port without a regout port as well. Either a regout port must be added to the WYSIWYG primitive or the clk port must be removed.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. Otherwise, contact Altera Applications for assistance.

- PLDWorld -

 

Created by chm2web html help conversion utility.