Quartus

WYSIWYG I/O primitive <name> cannot have both aclr port and a POWER_UP parameter value set to HIGH


CAUSE: The specified WYSIWYG I/O primitive has both an aclr port and a POWER_UP parameter value set to HIGH. Either the aclr port must be removed or the WYSIWYG I/O primitive's POWER_UP parameter must be changed to LOW.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. Otherwise, contact Altera Applications for assistance.

- PLDWorld -

 

Created by chm2web html help conversion utility.