Quartus

WYSIWYG LCELL primitive <name> must use multout, combout, or regout port when in multiplier mode


CAUSE: The specified WYSIWYG LCELL primitive is in multiplier mode, but is not using the multout, combout, or regout port. The multout, combout, or regout port must be connected when the WYSIWYG LCELL primitive is in multiplier mode.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. Otherwise, contact Altera Applications for assistance.

- PLDWorld -

 

Created by chm2web html help conversion utility.