Quartus

WYSIWYG LCELL primitive <name> must not use combout port when in counter mode


CAUSE: The specified WYSIWYG LCELL primitive uses a combout port, but the OPERATION_MODE parameter is set to COUNTER. The WYSIWYG primitive must not use a combout port when it is in counter mode. Either the combout port must not be used, or the OPERATION_MODE parameter must be set to NORMAL or ARITHMETIC.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. Otherwise, contact Altera Applications for assistance.

- PLDWorld -

 

Created by chm2web html help conversion utility.