Quartus

WYSIWYG LCELL primitive <name> must not use datad port when in arithmetic mode


CAUSE: The specified WYSIWYG LCELL primitive, has a datad port, but its OPERATION_MODE parameter is set to ARITHMETIC. The WYSIWYG LCELL primitive must not have a datad port when it is in arithmetic mode. Either the datad port must be removed from the WYSIWYG LCELL primitive, or the OPERATION_MODE parameter must be set to NORMAL.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. Otherwise, contact Altera Applications for assistance.

- PLDWorld -

 

Created by chm2web html help conversion utility.