Quartus

clr0 port of WYSIWYG primitive <name> cannot be specified if it is not used


CAUSE: The specified WYSIWYG primitive has a clr0 port, but the port is not in use. The WYSIWYG primitive cannot have a clr0 port if the port is not in use. The CLEAR0 parameter value must be either specified for the WYSIWYG primitive or removed from the primitive.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. Otherwise, contact Altera Applications for assistance.

- PLDWorld -

 

Created by chm2web html help conversion utility.