Quartus

WYSIWYG LCELL primitive <name> must use datab port if multsela and multselb ports are dependent on it when in multiplier mode

CAUSE: The specified WYSIWYG LCELL primitive is in multiplier mode, but does not use the datab port. When the WYSIWYG LCELL primitive is in multiplier mode, the datab port must be connected if the multsela and multselb ports are dependent on it.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. Otherwise, contact Altera Applications for assistance.

- PLDWorld -

 
Created by chm2web html help conversion utility.