| CAUSE: | The specified WYSIWYG primitive uses the pterm5 port, but is also either in non-parallel expander mode (that is, the PEXP_MODE parameter is set to OFF) or in VCC mode (that is, the OPERATION_MODE parameter is set to VCC). The pterm5 port is not supported for non-parallel expander mode or VCC mode. Either the PEXP_MODE parameter must be set to ON or the OPERATION_MODE parameter set to something other than VCC if the pterm5port is used. |
| ACTION: | If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. Otherwise, contact Altera Applications for assistance. |
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |