| CAUSE: | The specified WYSIWYG primitive has the SUM_LUTC_INPUT parameter set to QFBK, but the LUT_MASK parameter defines a sum LUT mask that does not depend on the datac input signal value. The sum LUT mask must depend on the datac input signal value if the SUM_LUTC_INPUT parameter is set to QFBK. Either the LUT_MASK parameter must be set to a different value, or the SUM_LUTC_INPUT parameter must be set to a value other than QFBK. |
| ACTION: | If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. Otherwise, contact Altera Applications for assistance. |
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |