Quartus

WYSIWYG primitive <name> must not use pxor port in non-XOR mode


CAUSE: The specified WYSIWYG primitive uses a pxor port, but is not in XOR mode (that is, the OPERATION_MODE parameter is set to something other than XOR). The pxor port is not supported for non-XOR modes. Either the pxor port must not be used, or the OPERATION_MODE parameter must be set to XOR.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. Otherwise, contact Altera Applications for assistance.

- PLDWorld -

 

Created by chm2web html help conversion utility.