Quartus

In multiplier mode, ATOM <name> must connect its multout or regout port to dataa or datab port of only one other ATOM


CAUSE: The specified ATOM, which is in multiplier mode, is not a multiplier output. Therefore, the multout or regout port of the ATOM must connect to the dataa or datab port of only one other ATOM that is in multiplier mode.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. Otherwise, contact Altera Applications for assistance.

- PLDWorld -

 

Created by chm2web html help conversion utility.