| CAUSE: | The specified I/O ATOM uses the aclr port and has its POWER_UP_HIGH parameter value set to TRUE, or uses a preset port and has its POWER_UP_HIGH parameter value set to FALSE. The I/O ATOM cannot have either of these combinations of settings. Either the aclr port or preset port for the corresponding POWER_UP_HIGH parameter value must be removed, or the POWER_UP_HIGH parameter value must be changed. |
| ACTION: | If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. Otherwise, contact Altera Applications for assistance. |
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |