| CAUSE: | The specified I/O ATOM, which has its OPERATION_MODE parameter value set to either OUTPUT or BIDIR, does not have a data source. The I/O ATOM must have a datain port connection, its oe port set to GND, or the I/O ATOM's REG_SOURCE_MODE parameter value changed to PIN_LOOP. |
| ACTION: | If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. Otherwise, contact Altera Applications for assistance. |
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |