CAUSE 1: | The specified Embedded System Block (ESB) ATOM uses more than two clear signals, but the APEX II device you specified for the current design supports only a maximum of two clear signals per ESB. |
ACTION: | Modify the design so the ESB ATOM requires no more than two clear signals. |
CAUSE 2: | The specified Embedded System Block (ESB) ATOM, which implements bidirectional dual-port RAM or is being used in packing mode as two independent 2,048-bit single-port RAM blocks, requires more than one clear signal for Port A or for Port B. However, the APEX II device you specified for the current design supports only a maximum of one of each signal per ESB port. |
ACTION: | Modify the design so the ESB ATOM requires no more than one clear signal per port. |
See also:
Specifying the Device Family & Device for Compilation
- PLDWorld - |
|
Created by chm2web html help conversion utility. |