| CAUSE: | You tried to manually assign the specified RAM ADDRESS_WIDTH and DATA_WIDTH parameters to the specified the location. However, the specified RAM ADDRESS_WIDTH and DATA_WIDTH parameters may be too large for the specified location, or the specified location may already be occupied. |
| ACTION: | Edit the design file to select a different location for the specified RAM ADDRESS_WIDTH and DATA_WIDTH parameters, or ensure the specified location is unique. Otherwise, if you want the Fitter to automatically specify the location of the RAM, you must remove the specified location from the design file. To avoid receiving this message in the future, Altera recommends allowing the Fitter to automatically specify the location of the RAM. |
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |