Quartus

Input I/O cell <name> has 3.3-V PCML I/O standard, but is assigned to a pin that does not support this differential I/O standard


CAUSE: You assigned the specified cell to a pin. You have also assigned a 3.3-V PCML I/O standard to the specified cell. However, the destination pin does not support this differential I/O standard.
ACTION: Remove the 3.3-V PCML I/O standard assigned to the input I/O cell, or assign the input I/O cell to a different location..

See also:

Assigning Pins
Deleting Assignments in the Assignment Organizer
Changing Assignments
Overview: Working with Assignments in the Assignment Organizer
Overview: Working with Assignments in the Floorplan Editor

- PLDWorld -

 

Created by chm2web html help conversion utility.