Quartus

Can't place ClockLock PLL <name> in ClockLock PLL_<number> circuitry because node <name>, which feeds port of type <type>, also feeds to other destinations, but the global signal required to feed to these destinations is already occupied


CAUSE: The specified node of the specified ClockLock PLL also feeds to other destinations. However, the Fitter cannot place the ClockLock PLL at the specified location because another ClockLock PLL in the device is already using the global signal required to feed these destinations.
ACTION: Modify the design so that the specified node feeds only the specified ClockLock PLL or delete any pins assignments that may restrict placement of the ClockLock PLL in the device.

- PLDWorld -

 

Created by chm2web html help conversion utility.