| CAUSE: | You assigned the Turbo Bit logic option to the two specified RAM outputs, which are in the same Embedded System Block (ESB). However, the Turbo Bit logic option settings do not match: one is Off and one is On. When this occurs, the two RAM cannot be assigned to the same ESB. The Turbo Bit option for both RAM outputs must be set to the same setting or the two RAM must be assigned to different ESBs. |
| ACTION: | Make the Turbo Bit logic option settings on both RAM outputs match or assign the RAM to different ESBs. |
See also:
Assigning Options for Individual Nodes & Entities
Changing Assignments
Overview: Making Assignments
Overview: Working with Assignments in the Floorplan Editor
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |