Quartus

Can't place output or bidirectional pin <name> in I/O bank <number> -- pin requires a VCCIO of <name> and I/O bank uses a VCCIO of <name>


CAUSE: You assigned the specified output or bidirectional pin to the specified I/O bank. However, the Fitter cannot place the output or bidirectional pin because the I/O bank uses a different VCCIO than the one required by the output or bidirectional pin.
ACTION: Assign the specified pin to a different I/O bank or remove the assignment.

See also:

Assigning Pins
Overview: Making Assignments
Overview: Working with Assignments in the Floorplan Editor

- PLDWorld -

 

Created by chm2web html help conversion utility.