Quartus

Node for output or bidirectional pin <name> is assigned to an LVDS receiver or LVDS transmitter channel pin


CAUSE: You used the Floorplan Editor to assign the specified output or bidirectional pin to an LVDS receiver or LVDS transmitter channel pin. When you use the altlvds_rx or altlvds_tx megafunctions in your design, you cannot place output or bidirectional pins on a LVDS receiver or LVDS transmitter channel location.
ACTION: Assign the output or bidirectional pin to a pin location that is not used as an LVDS transmitter or receiver channel pin.

- PLDWorld -

 

Created by chm2web html help conversion utility.