Quartus

Can't acquire data -- select correct communications cable and device


CAUSE: You selected one type of communications cable, such as the MasterBlaster cable or ByteBlasterMV cable, but attempted to run the SignalTap II Logic Analyzer with a different type of communications cable, or you specified a device that does not match the device on the circuit board. As a result, the SignalTap II Logic Analyzer cannot acquire data.
ACTION: Select the appropriate communications cable and device, and re-attempt to run the SignalTap II Logic Analyzer.

See also:

Overview: Using the SignalTap II Logic Analyzer

- PLDWorld -

 

Created by chm2web html help conversion utility.