Quartus

Can't run SignalTap II -- specify communications cable and device


CAUSE: You tried to run the SignalTap II Logic Analyzer, but you either did not specify a communications cable, or you did not specify a device. As a result, the SignalTap II Logic Analyzer cannot run.
ACTION: Select a communications cable and device, and re-attempt to run the SignalTap II Logic Analyzer. This error can occur if you manually edited the SignalTap II File (.stp), or used the Tcl sld run command.

See also:

Overview: Using the SignalTap II Logic Analyzer
Running the SignalTap II Logic Analyzer

- PLDWorld -

 

Created by chm2web html help conversion utility.