| CAUSE: | You tried to run the SignalTap II Logic Analyzer, but you did not download a design with the current SRAM Object File (.sof), you did not compile the design with a SignalTap II File (.stp) enabled, the design did not compile correctly, or the circuit board is not connected to a communications cable. |
| ACTION: | Make sure the circuit board is connected to a communications cable, compile the embedded logic analyzer megafunction, program the device with the latest SOF, and re-attempt to run the SignalTap II Logic Analyzer. |
See also:
Overview: Using the SignalTap II Logic Analyzer
Running the SignalTap II Logic Analyzer
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |