| CAUSE: | You specified the ADT PALACE software as the EDA tool for resynthesis, directed the EDA tool to start automatically after the Quartus II software compiles the design, and then compiled the design. However, the resynthesis tool does not support the target device family for the design. |
| ACTION: | Specify a different device family and recompile the project. |
See also:
Compiling a Design
Overview: Using the PALACE Software with the Quartus II Software
Specifying EDA Tool Settings
Specifying the Device Family & Device for Compilation
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |