| CAUSE: | You specified the EDA tool you are using for simulation for the current project, and then ran the EDA simulation tool from within the Quartus II software without recompiling the design. However, the Quartus II software could not launch the tool, or problems occured during generation of the output files or library files. |
| ACTION: | Correct the error(s) and run the EDA simulation tool again. Refer to the messages that occur before this one in the Messages window for more information on why the simulation tool could not be launched. |
See also:
Running an EDA Simulation or Timing Analysis Tool After Compilation
Specifying EDA Tool Settings
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |