| CAUSE: | You attempted to generate a flash programming file. As part of this process, you specified in the System Build Descriptor File (.sbd) for the current project that you want to configure the Expansion Bus Interface (EBI) for an ARM-based Excalibur device. However, when editing the SBD File, you did not map a memory region for Expansion Bus Interface zero (EBI0). You must map a memory region for EBI0 to configure the EBI. |
| ACTION: | Edit the SBD File to map a memory region for EBI0. |
See also:
Alternative Procedure for Generating a Flash Programming File
Generating a Flash Programming File
Overview: Using the MegaWizard Plug-In Manager
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |