| CAUSE 1: | You specified a target device for the current design, but the design requires too many I/O pins to fit in the target device. |
| ACTION: | Reduce the number of I/O pins in the design or select a larger device. |
| CAUSE 2: | You directed the Compiler to select a target device for the current design, and specified the devices from which you want the Compiler to select the target device. However, the design requires too many I/O pins to fit in any of the devices you specified. |
| ACTION: | Reduce the number of I/O pins in the design, specify different devices, or select another device family. |
See also:
Specifying the Device Family & Device for Compilation
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |