| CAUSE 1: | You specified a target device for the current design, but the design is too large to fit in the target device. |
| ACTION: | Reduce the RAM or the number of product terms in the design or select a larger device. |
| CAUSE 2: | You directed the Compiler to select a target device for the current design, and specified the devices from which you want the Compiler to select the target device. However, the design is too large to fit in any of the devices you specified. |
| ACTION: | Reduce the RAM or the number of product terms in the design, specify different devices, or select another device family. |
See also:
Specifying the Device Family & Device for Compilation
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |