| CAUSE: | You directed the Compiler to select a target device for the current design, and specified the devices from which you want the Compiler to select the target device. However, the design includes too wide dual-port RAM to fit in any of the devices you specified. |
| ACTION: | Reduce the width of the input/output data bus, specify different devices, or select another device family. To avoid receiving this message in the future, Altera recommends using the Excalibur MegaWizard Plug-In, which is available from the MegaWizard Plug-In Manager, to configure the dual-port RAM blocks in the device, rather than manually editing the text file. |
See also:
Specifying the Device Family & Device for Compilation
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |