CAUSE: | You clicked Start in the Programmer window, but the Programmer cannot recognize the silicon ID from the specified device. As a result, programming was unsuccessful. The problem can be caused by the following conditions:
|
ACTION: | Make sure all cables are securely connected, select a different device, or check the power on the target system. If you are using an enhanced configuration device, make sure that the device pins are connected correctly, and that the flash interface pins of the enhanced configuration device are not being driven by another device. |
See also:
Image of Programmer
"Installing Programming Hardware" in the Quartus II Installation & Licensing for PCs manual
"Installing Programming Hardware" in the Quartus II Installation & Licensing for UNIX and Linux Workstations manual
- PLDWorld - |
|
Created by chm2web html help conversion utility. |