Quartus

Multiple files specified in Programmer


CAUSE: You are trying to program a device chain using a Jam File (.jam) or Jam Byte-Code File (.jbc) along with one or more additional programming files. However, you can use a Jam or JBC File to program a device chain only when the Jam or JBC File is the only file in the File list in the Programmer window.
ACTION: Remove all files from the File list except the Jam or JBC File.

See also:

Programming a Single Device or Multiple Devices in JTAG or Passive Serial Chains with the MasterBlaster, ByteBlasterMV, or ByteBlaster II Download Cable
Removing a Programming File or Device from a JTAG or Passive Serial Chain

- PLDWorld -

 

Created by chm2web html help conversion utility.