Quartus

Device number <number> failed to configure in passive serial chain


CAUSE: You tried to configure a device chain using passive serial mode. However, the Programmer failed to configure the specified device in the passive serial chain. This error can occur when you do not use the correct programming file, or there may be a problem with the connections on the board.
ACTION: Make sure you are using the correct SRAM Object File (.sof) and check the connections on the board.

See also:

Programming a Single Device or Multiple Devices in JTAG or Passive Serial Chains with the MasterBlaster, ByteBlasterMV, or ByteBlaster II Download Cable

- PLDWorld -

 

Created by chm2web html help conversion utility.