| CAUSE: | You tried to add a Jam File (.jam) or Jam Byte-Code File (.jbc) to a JTAG chain in the Programmer window using the Add File command (right button pop-up menu). However, the Quartus II software cannot add the file to the JTAG chain because the Jam File or JBC File does not contain a cyclic redundancy check (CRC) code. The Jam File or JBC File must contain a CRC code. |
| ACTION: | Re-create the Jam File or JBC File or open the Jam File or JBC File in the Quartus II Text Editor and add the CRC code at the end of the file. |
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |