| CAUSE: | You removed the family parameter from the specified device block in the System Build Descriptor File (.sbd) for the current design. However, the device block must contain a family parameter. This error may occur because you manually edited the SBD File. |
| ACTION: | Add a family parameter to the device block in the SBD File. To avoid receiving this message in the future, Altera recommends using the ARM-based Excalibur MegaWizard Plug-In, which is available from the MegaWizard Plug-In Manager,to modify the SBD File, rather than editing the SBD File manually. |
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |