| CAUSE: | You set the specified device family as the setting for the family parameter in the System Build Descriptor File (.sbd) for the current design. However, the device family is invalid in an SBD File. This error may occur because you manually edited the SBD File. |
| ACTION: | Make sure you set a valid, ARM-based Excalibur device family for the parameter. To avoid receiving this message in the future, Altera recommends using the ARM-based Excalibur MegaWizard Plug-In, which is available from the MegaWizard Plug-In Manager, to modify the SBD File, rather than editing the SBD File manually. |
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |