CAUSE: | The Simulator cannot find the specified Simulator settings, which are required to simulate the design, in the Simulator Settings File (.ssf). This error may occur if you manually edit the SSF in the Text Editor. The SSF must contain the specified Simulator settings before the Simulator can use them. |
ACTION: | Specify the Simulator settings for the design or add them manually to the SSF using the Text Editor, and then try the timing or functional simulation again. |
See also:
Performing a Functional Simulation
Performing a Timing Simulation
Specifying Simulator General Settings
- PLDWorld - |
|
Created by chm2web html help conversion utility. |