| CAUSE: | You compared two vector source files. The compared vector source does not contain the specified node that is contained in the original file. For the Quartus II software to perform an accurate file comparison, both files must contain the same nodes. |
| ACTION: | To make sure the compared file contains all the node names listed in the original file, add a node name to the compared vector source file or delete a node name from the original vector source file. |
See also:
Comparing Waveform Files
Creating a Node in a Waveform File
Deleting a Node, Group, or Waveform Interval from a Waveform File
Starting & Stopping the Simulator
Specifying Simulator Time & Vector Settings
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |