Quartus

VHDL attribute error at <location>: predefined attribute <name> must specify a range


CAUSE: In a VHDL Design File (.vhd), you used the specified predefined attribute in the specified location, which requires a range. However, the predefined attribute does not specify a range.
ACTION: Replace the predefined attribute with a predefined attribute that specifies a range. Or, replace the predefined attribute with a range.

See also:

Section 14.1 of the IEEE Std 1076-1993 IEEE Standard VHDL Language Reference Manual

- PLDWorld -

 

Created by chm2web html help conversion utility.