| CAUSE: | You made a change to the current SignalTap II File (.stp) that requires recompilation, and then attempted to run the SignalTap II Logic Analyzer, but you did not recompile the design. As a result, the SignalTap II Logic Analyzer cannot capture data on the current design. |
| ACTION: | If you want to apply the current analyzer settings to the design, recompile the design and then run the SignalTap II Logic Analyzer. Otherwise, restore the analyzer settings to be compatible with the last compilation result. |
See also:
Compiling a SignalTap II File with the Selected Project
Overview: Using the SignalTap II Logic Analyzer
Running the SignalTap II Logic Analyzer
Read This Before Compiling a SignalTap II File with the Selected Project
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |