| CAUSE: | You made a change either to a SignalTap II post-fitting node, or to a SignalTap II pre-synthesis node that is reserved for incremental routing, and then attempted to run the SignalTap II Logic Analyzer. However, you must compile the STP File with the current project to reroute the nodes in order to run the SignalTap II Logic Analyzer. |
| ACTION: | Compile the SignalTap II File (.stp) with the current project, and then re-attempt to run the SignalTap II Logic Analyzer. |
See also:
Compiling a SignalTap II File with the Selected Project
Overview: Using the SignalTap II Logic Analyzer
Read This Before Compiling a SignalTap II File with the Selected Project
Running the SignalTap II Logic Analyzer
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |