| CAUSE: | You assigned logic conditions to one or more trigger levels and/or enabled a trigger input signal, and then ran the SignalTap II Logic Analyzer. As a result, the SignalTap II Logic Analyzer is waiting for the trigger to occur. |
| ACTION: | No action is required. If you want to stop the SignalTap II Logic Analyzer from waiting for the trigger, stop the SignalTap II Logic Analyzer. |
See also:
More Details About Acquiring SignalTap II Data
Defining a Trigger Level
Overview: Triggering the SignalTap II Logic Analyzer
Overview: Using the SignalTap II Logic Analyzer
Running the SignalTap II Logic Analyzer
Setting the Trigger Input
Stopping the SignalTap II Logic Analyer
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |