CAUSE: | You created absolute and derived clock settings for the specified clock signals in the design. However, you did not specify an offset for the derived clock. The Quartus II software detected and used the specified offset between the derived clock and the absolute clock for timing analysis. |
ACTION: | If you want to use the detected offset, no action is required. If you do not want to use the detected offset, specify an offset for the derived clock in the clock settings. |
See also:
Creating Clock Settings
Editing Clock Settings
Overview: Using Clock Settings
Overview: Using the Timing Analyzer
- PLDWorld - |
|
Created by chm2web html help conversion utility. |