| CAUSE: | You compared two vector source files. The compared vector source file contains the specified node that is not contained in the original file used as the basis for the comparison. For the Quartus II software to perform an accurate file comparison, both files must contain the same nodes. |
| ACTION: | To make sure that the original file contains all the node names listed in the compared file, add a node name to the original vector source file or delete a node name from the compared vector source file. |
See also:
Comparing Waveform Files
Creating a Node in a Waveform File
Deleting a Node, Group, or Waveform Interval from a Waveform File
Starting & Stopping the Simulator
Specifying Simulator Time & Vector Settings
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |