| CAUSE: | You attempted to open the Assign Pins dialog box with the SignalProbe Settings button on the toolbar, but the target device for the design does not support individual pin assignments. The target device must support individual pin assignments in order to create SignalProbe assignments. The Quartus II software cannot open the Assign Pins dialog box with the SignalProbe Settings button unless the target device supports individual pin assignments. |
| ACTION: | Click OK to close the message dialog box. If you do not want to create SignalProbe assignments, no action is required. If you want to create SignalProbe assignments, specify a target device that supports SignalProbe assignments. |
See also:
Specifying the Device Family & Device for Compilation
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |