| CAUSE: | You attempted to define the specified signal as both a clock signal and a SignalTap II signal. However, the SignalTap II Logic Analyzer cannot assign the same signal as a clock signal and a SignalTap II signal. As a result, the Quartus II software is removing the duplicate signal name. |
| ACTION: | Click OK to close the message dialog box, and assign a unique signal name as the clock signal or SignalTap II signal. |
See also:
Overview: Using the SignalTap II Logic Analyzer
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |