Quartus

Ignored input port sclr -- port not used in current design


CAUSE: You specified the sclr input port of the altmemmult megafunction of the current design; however, the altmemmult megafunction of the current design does not use the sclr input port. As a result, the Quartus II software ignored the sclr input port. This warning usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager command.
ACTION: No action is required. To avoid receiving this message in the future, remove the sclr input port from the altmemmult megafunction of the current design, or Altera recommends using the MegaWizard Plug-In Manager command.

- PLDWorld -

 

Created by chm2web html help conversion utility.