| CAUSE: | You specified the sload_data input port of the altmemmult megafunction; however, the altmemmult megafunction of the current design does not use the sload_data input port. As a result, the Quartus II software ignored the sload_data input port. This warning usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager command. |
| ACTION: | No action is required. To avoid receiving this message in the future, remove the sload_data input port from the altmemmult megafunction of the current design, or Altera recommends using the MegaWizard Plug-In Manager command. |
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |