Quartus

EDA design entry or synthesis tool was not specified. Detecting EDA tool <name> as the tool that generated the EDIF Input File.

CAUSE: You did not specify an EDA design entry or synthesis tool for the current project. The Quartus II software automatically detected the specified EDA tool as the tool that generated the EDIF Input File (.edf).
ACTION: If the EDA design entry or synthesis tool is correctly detected by the Quartus II software, no action is required. To avoid receiving this message in the future, specify the correct EDA tool.

See also:

Specifying EDA Tool Settings

- PLDWorld -

 
Created by chm2web html help conversion utility.