Quartus

Changed compensation clock parameter for PLL <name> to regional clock instead of global clock setting because PLL is placed in location that compensates for regional clock only

CAUSE: You set the compensation clock parameter of the specified PLL to the global clock setting. However, the Fitter cannot place the specified PLL in a PLL location that compensates only for the regional clock. The Fitter reset the compensation clock parameter to the regional clock setting.
ACTION: No action is required. To avoid receiving this message in the future, if you are using an EDA tool, contact the technical support for the EDA tool. Otherwise, contact Altera Applications for assistance.

- PLDWorld -

 
Created by chm2web html help conversion utility.